Mould Incubator

BJPX-M70PF / BJPX-M150PF / BJPX-M250PF

This series of products are widely used in medical and health, animal husbandry research, environmental protection, agricultural scientific research and other fields.

Key features

Programmable temperature
Uniform controlled environment
Selectable capacities and accessories

Made to orderPrice on request

Manufacturer: BIOBASE

Request a quote

Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / Accessories

Available accessories

Optional accessories

Spare shell
Touche screen controller
RS485 interface USB interface and software
Printer
Recorder
Remote control
U-disk storage

Final contents, accessory compatibility and availability are confirmed in the quotation for the selected model.

02 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

Parameter	BJPX-M70PF	BJPX-M150PF	BJPX-M250PF
Cycle Mode	Common to all modelsForced convection
Temp. Range	Common to all modelsNo humidification: 0–65 °C; Humidification: 10–65 °C
Temp. Resolution Ratio	Common to all models0.1 °C
Temp. Motion	Common to all modelsHigh Temp.: ±0.5 °C Low Temp.: ±1 °C
Temp. Uniformity	Common to all models±1 °C
Humidity Range	Common to all models45 %~95 %RH
Humidity Stability	Common to all models±5 %RH
Inner Chamber	Common to all modelsMirror stainless steel
Outer Shell	Common to all modelsCold rolling steel electrostatic spraying exterior
Insulation Layer	Common to all modelsPolyurethane
Heater	Common to all modelsStainless steel heater
Consumption	1.8KW	2KW	2.2KW
Compressor	Common to all modelsAir cooled hermetic compressor
Cryogen	Common to all modelsR134a
Defrost Structure	Common to all modelsAutomatic control intelligent defrosting
Humidifying Method	Common to all modelsExternal
Test Hole	Common to all modelsPlastic test hole Ф43 mm
Sterilizing Lamp	Common to all modelsStandard ozone-free type
Controlled External Power Supply	Common to all modelsUniversal socket(one)
Temp. Control Mode	Common to all models30 segment lcd program
Temp. Setting Mode	Common to all modelsTouch button setting
Temp. Display Mode	Common to all modelsMeasuring temperature: LCD upper row Setting temperature: the lower row
Humidity Control Mode	Common to all modelsAuto
Timer	Common to all models0–99.9 h*30 segment(with timing wait function)
Operation Function	Common to all modelsFixed value operation, timing function, auto stop, program operation
Sensor	Common to all modelsPT100
Humidity Sensor	Common to all modelsHigh precision anti-condensation
Additional Function	Common to all modelsDeviation correction, Menu key lock Power failure parameter memory Additional character: UV light, loop self diagnosis
Safety Device	Common to all modelsOver temperature alarm, over humidity alarm, water shortage alarm
Volume	70 L	150 L	250 L
Load Per Rack(kg)	Common to all models15
Shell Number	5	9	12
Shell Space	Common to all models35 mm
Supply(50/60Hz) Current Rating	AC220V/8.2 A	AC220V/9.1 A	AC220V/10 A
Shell	Common to all models2
Shelf Rack	Common to all models4
Inner Chamber Size(WLH)(mm)	415 × 350 × 500	490 × 400 × 750	500 × 515 × 950
Exterior Size(WLH(mm)	571 × 591 × 1051	646 × 641 × 1301	656 × 741 × 1501
Packing Size(WLH(mm)	680 × 676 × 1235	751 × 730 × 1490	761 × 830 × 1690
Net Weight(kg)	69	86	100
Gross Weight(kg)	92	114	139

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

Mould Incubator

Available accessories

LaboratoriX technical datasheet

Do you need this equipment?

Related equipment

CO₂ incubator

Forced-air drying oven

CO2 Incubator 50L 80L 160L 180L 220L 300L