PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 1 image.

Laboratory analysis

Automobile Exhaust Analyzer

BK-EA500

Applications: Used to measure vehicle emissions of gas concentration.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterBK-EA500
Measurement range
HC:0–10000 × 10–6 (ppm) vol · C0:0–10 × 10–2(%)vol CO2:0–20 × 10–2(%)vol · O2:~25 × 10・2(%)vol NOx:0–5000 × 10・6 (ppm) vol λ:0.50–3.00 COcor:0–10 × 10–2(%)vol
Speed speed
0–9990 rpm
Oil temperature
0–150 °C
The value error
HC ± 12 × 10–6 (PPM) VOL (absolute error) or ± 5 %(relative error) CO ± 0.06 × 10–2 (%) VOL (absolute error) or ± 5 %(relative error) CO2 ± 0.5 × 10–2 (%) VOL (absolute error) or ± 5 %(relative error) 02 ± 0.1 × 10–2 (%) VOL (absolute error) or ± 5 %(relative error) Nox ± 25 × 10–6 (PPM) VOL (absolute error) or ± 4 %(relative error)
Repeatability error
<±2 %
Stability
Torque drift < ± 3 %, zeroing
Resolution
HC: 1 × 10–6 (ppm) vol CO: 0.01 × 10–2(%)voI CO2: 0.1xiQ-2(%)vol O2: 0.01 × 10–2(%)vol NOx:1><10–6 (ppm) vol λ:0.01
The response time
95 %response is not more than 10 seconds
Preheating time
8 min (preheating 3 min emergency test)
The output method
Can be displayed on the screen. The maximum value, average, minimum value and license plate number of the gas concentration can be printed. Date, speed, oil temperature and λ, COCOR value, can be connected to the computer network
Environmental conditions
Temperature -5–50 °C, relative humidity <90 %
Power supply
AC100–240 V 50/60 Hz or DC 12 V (select the power inverter). Consumption power 40VA
Dimensions
420 mm (long) x 310 mm (width) x 170 mm (height)
Weight
About 9 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.