Home/Catalogue/SCSJ-II 15 / SCSJ-II 30

Water purifiers

Laboratory Water Purifier SCSJ-II 15 SCSJ-II 30

SCSJ-II 15 / SCSJ-II 30

Purified-water production for analytical workflows and laboratory preparation.

Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / Key features

Key features

  • Continuous purified-water production
  • Quality selected by application
  • Output-parameter monitoring

02 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterSCSJ-II 15SCSJ-II 30
Water Output Type
Common to all modelsRO water
Water Output Speed15L/H30L/H
Purifying Procedure
Common to all modelsPF+AC+RO+AC
Water Supply Requirement
Common to all modelsTap water: TDS<200ppm, 5~45°C, 1.0~4.0Kgf/cm² (if inlet TDS>200ppm, extra pretreatmentfilter is recommended)
Purification System
Common to all modelsPretreatment Unit · Folded composite filter element*1 Activated carbon filter *1 · Folded composite filter element*1 Activated carbon filter *1
Purification System (2)
Common to all modelsRO Unit · 100 GPD RO membrane*1 · 200 GPD RO membrane*1
Pure Water Quality
Common to all modelsIon Rejection Rate · 97%~99%(New RO membrane) · 97%~99%(New RO membrane)
Pure Water Quality (2)
Common to all modelsOrganic Rejection Rate · >99%, when MW>200 Dalton · >99%, when MW>200 Dalton
Pure Water Quality (3)
Common to all modelsParticles and Bacteria Rejection Rate · >99% · >99%
Pure Water Quality (4)
Common to all modelsBacteria · <0.1cfu/ml(with optional 0.45+0.1μm PES terminal filter) · <0.1cfu/ml(with optional 0.45+0.1μm PES terminal filter)
Pure Water Quality (5)
Common to all modelsParticles(>0.2μm) · <1/ml(with optional 0.45+0.1μm PES terminal filter) · <1/ml(with optional 0.45+0.1μm PES terminal filter)
Flow Rate
Common to all models2.0L/min(with pressure tank)
Water Quality Monitor
Common to all modelsTDS/condactivity test pen
Comsumption
Common to all models72W
Power Supply
Common to all modelsAC220V, 50/60Hz; AC110V, 50/60Hz
Standard Configuration
Common to all modelsMain body(Include 1 set of purification column), 15 liters tank, TDS/conductivity test pen, accessory pack
External Size(W*D*H)
Common to all models410*220*420mm
Package Size(W*D*H)
Common to all models600*490*580mm
Gross Weight
Common to all models35kg

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

Request a quote