PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 1 image.

Laboratory analysis

Fiber Analyzer

BK-F1600

It is a high-throughput, high-efficiency, easy-to-operate automatic crude fiber tester developed by using the three-dimensional filter bag method, combined with no cooling water, high-pressure sealing technology and modern electronic technology.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterBK-F1600
Processing Temperature Range
Room temperature ~100 °C
Sampling Amount/Bag
0.5–1.5 g
Fiber Test Range
0.1–100 %
The Cooking Time Setting of Each Stage
0–999 min
Repeatability Accuracy
If the fiber content is less than 10 %, the relative deviation is ≤5 %; · If the fiber content is greater than 10 %, the relative deviation is ≤3 %
Daily Processing Capacity
24–96 pieces of crude fiber, 24–120 pieces of neutral detergent fiber/acid detergent fiber/lignin(8-hour working system)
External Size(W*D*H)
560 × 430 × 510 mm
Net Weight
28 kg
Package Size(W*D*H)
660 × 500 × 590 mm
Gross Weight
44 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.