PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 2 images.

Laboratory analysis

Closed-Cup Flash Point Tester

BK-FP261 / BK-FP261D

It is used to make determination of the closed cup flash point of the petroleum products.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterBK-FP261BK-FP261D
Ambient Temperature
Common to all models15–35 °C
Relative Humidity
Common to all models≤85 %
Flash Point DeterminationMercury-in-glass thermometer. Specifications are as below: Scale -5 °C~110 °C, division 0.5 °C Scale 20 °C~150 °C, division 1 °C Scale 90 °C~370 °C, division 2 °CRange: ambient to 230 °C Repeatability: ≤3 °C Reproducibility: ≤4 °C Accuracy: 0.1 °C
Oil Cup
Common to all modelsInner diameter: 50.7 mm~50.8 mm Depth: 55.7 mm~56.0 mm The scribed line depth of capacity of testing oil: 33.9 mm~34.3 mm. Capacity of testing oil about 70 mL
Stirring Rate
Common to all modelsProcedure A: (90–120)RPM, Procedure B: (250±10)RPM
Igniting DeviceIgniting Source: gas(or other civilian fuels, the same below)Electric ignition. Diameter of Igniter: 0.7 mm~0.8 mm
Heating Device
Common to all modelsThe heating power is continuously adjustable from 0 W to 600 W
Heating Rate(1–12)°C/min: controllable and adjustableProcedure A: (5–6)°C/min Procedure B: (1–1.5)°C/min Procedure C: (3±0.5)°C/min
Consumption≤650 W≤600 W
Power Supply
Common to all modelsAC220V, 50 Hz
External Size(W*D*H)370 × 320 × 300 mm510 × 320 × 330 mm
Package Size(W*D*H)650 × 455 × 360 mm690 × 520 × 610 mm
Gross Weight18 kg35 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.