PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 1 image.

Laboratory analysis

Digital Melting Point Apparatus

BMP-2C / BMP-1C

The principle of the melting point apparatus is based on the phase transition process of matter, that is, the transition from a solid to a liquid state.When measuring with a melting point meter, first place the sample to be tested in the sample chamber and ensure that the sample is in a solid state. Then, heat is applied to the sample through a heating system, gradually increasing the temperature of the sample.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterBMP-2CBMP-1C
Measuring RangeRT~360 °CRT~400 °C
Resolution
Common to all models0.1 °C
Linear Heating-up Rate
Common to all models0.1 °C/min~20 °C/min
Temperature Accuracy
Common to all models±0.4 °C(≤200 °C), ±0.7 °C(>200 °C)
Repeatability
Common to all models0.3 °C(Heating rate: 1.0 °C/min)
Capillary Size
Common to all modelsφ1.4 mm(outside diameter), φ1.0 mm(inside diameter), 90 mm(length)
Sample Loading Height
Common to all models3 mm
Data Storage
Common to all models1000 sets
Thermal PrinterStandardOptional
Interface
Common to all modelsRS232, USB
Power Supply
Common to all modelsAC110–240 V, 50/60 Hz
External Size(W*D*H)
Common to all models360 × 290 × 170 mm
Package Size(W*D*H)580 × 445 × 320 mm500 × 445 × 330 mm
Gross Weight13 kg11 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.