PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 1 image.

Laboratory analysis

Pocket Conductivity Tester

PH-DEC1

This tester can measure conductivity, TDS, salinity, resistivity and temperature altogether.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterPH-DEC1
Conductivity
Range · 0 to 19.99mS/cm, auto divided by range
Conductivity (2)
Resolution · 0.1/1µS/cm, 0.01mS/cm
Conductivity (3)
Accuracy · ±1.0 %F.S±one digit
Conductivity (4)
Calibration Points · 1 point
TDS
Range · 0.1ppm to 10.0ppt
TDS (2)
TDS Factor · 0.40 to 1.00
Salinity
Range · 0–10ppt
Resistivity
Range · 50Ω·cm to 20MΩ·cm
Temperature — Range
0–60 °C(32–140℉)
Temperature — Accuracy
±0.2 °C
Power Requirements
4×1.5 V AAA alkaline batteries
External Size(W*D*H)
38 × 36 × 195 mm
Package Size(W*D*H)
330 × 280 × 130 mm
Net Weight
147 g
Gross Weight
1 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.