PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 2 images.

Laboratory analysis

Open-Cup Flash Point Tester

BK-FP3536 / BK-FP3536D

It is applicable to all petroleum products with flash points above 79 °C and below 400 °C except fuel oils.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterBK-FP3536BK-FP3536D
Thermometer
Common to all models-6 °C~400 °C. It is the same as thermometer ASTM 11C
Ambient Temperature
Common to all models15 °C~35 °C
Relative Humidity
Common to all models≤ 85 %
Consumption≤ 650 W≤ 750 W
Test Flame Applicator
Common to all modelsIt applies the test flash automatically
Heating DeviceFurnace heating, no naked fire, explosion prevented. The power is adjustable from 0 W to 600 W1. Initial heating: (14–17)°C/min 2. It is (5–6)°C/min after reaching the preset flash point 20 °C
Igniting Device(1) Ignition source: coal gas(or civil gas) (2) Nozzle aperture: about 0.8 mmElectric ignition Diameter of igniter: 0.7 mm~0.8 mm
Flash Point Determination\Range: Ambient to 400 °C Accuracy: 0.1 °C
Power Supply
Common to all modelsAC220V, 50 Hz
Dimension(W*D*H)350 × 290 × 350 mm510 × 320 × 330 mm
Package Size(W*D*H)650 × 450 × 420 mm690 × 500 × 610 mm
Gross Weight20 kg35 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.