PTENESDEFR
Request a quote

Photography and technical data supplied by: BIOBASE · 1 image.

Laboratory analysis

Benchtop Water Analyzer

BK-WA2004

It can measure regular water quality parameters such as COD, ammonia nitrogen, total phosphorus, total nitrogen, etc. The concentration is directly readable and the measurement results are more accurate.

Key features

  • Digital measurement
  • Method matched to the parameter
  • Repeatable results and data capture
Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterBK-WA2004
Wavelength Range
190–1100 nm
Wavelength Accuracy
0.3 nm
Stray Light
0.05 %T
Display Error
≤8 %
Repeatability
≤±3 %
Light Source
Tungsten lamp(visible area) and deuterium lamp (ultraviolet area)
Optical Stability
≤0.001 A/10 min
Light Source Life
100,000 hours
Measurement Time
5 minutes
Number of Curves
200 can be set
Data Storage
5000 pieces can be stored
Reading Cuvette
Cuvette /colorimetric tube
Display
7 inch color touch screen
Printer
Built-in thermal printer
Data Communication
USB interface
Ambient Temperature
5–40 °C
Ambient Humidity
≤85 %(no condensation)
Consumption
70 W
Power Supply
AC220V±10 %, 50/60 Hz(Standard); 110 V, 60 Hz(Optional)
Package Size(L*W*H)mm
520 × 450 × 300
Gross Weight
11.5 kg

Technical data supplied by BIOBASE.

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

The information provided will be used only to respond to your request. More privacy information

Related equipment

Back to catalogue
BSD-660 BET surface area and porosity analyzer
BSD-660 Series

BET surface area and porosity analyzer

Automated volumetric system for measuring specific surface area, pore volume and pore-size distribution in mesoporous, microporous and ultramicroporous materials.

BIOBASE BK-TGA101 TGA thermogravimetric analyzer
BK-TGA101

TGA thermogravimetric analyzer

Thermogravimetric analyzer for studying the thermal stability and composition of polymers, rubber, coatings, catalysts, metals and composite materials up to 1150 °C.

Corrtest CS350M potentiostat/galvanostat with EIS
CS350M

Potentiostat/Galvanostat with EIS

Single-channel electrochemical workstation for corrosion, battery, electrocatalysis and materials research, with integrated electrochemical impedance spectroscopy.